Usage of Laser Therapy Equipment for Physiotherapy

The above video demonstrates the use of our laser therapy equipment for Shoulder pain.

Step 1: Assess the shoulder for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the shoulder is small, so use the small therapeutic head to cover the area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the shoulder.

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the shoulder. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for Neck pain.

Step 1: Assess the neck for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the neck is small, so use the small therapeutic head to cover the area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the neck

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the neck. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for knee pain.

Step 1: Assess the knee for swelling, inflammation and muscle spasm before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the knee is small, so use the small therapeutic head to cover the area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the knee.

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the knee. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for wrist pain.

Step 1: Assess the wrist for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the wrist is very small, so use the large therapeutic head to cover whole area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the wrist.

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the wrist. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for ankle pain.

Step 1: Assess the ankle for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the ankle is very small, so use the large therapeutic head to cover whole area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the ankle.

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the ankle. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for elbow pain.

Step 1: Assess the elbow for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the elbow is very small, so use the large therapeutic head to cover whole area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the elbow.

Step 5: Press small switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the small therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the elbow. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for calf pain.

Step 1: Assess the calf for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Surface area of the calf is very large, so use the large therapeutic head to cover whole area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the calf.

Step 5: Press large switch to turn on large therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the large therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the calf. Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 9: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 10: Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.

The above video demonstrates the use of our laser therapy equipment for
Sports Injuries.

Step 1: Assess the injured area for swelling, inflammation and muscle spasm, before starting the treatment.

Step 2: Identify the tender points, concentrate the treatment with CuraLaser over this area for optimum results.

Step 3: Depending on the surface area of the injured part, choose either large or small therapeutic head so as to cover whole area in a single treatment session.

Step 4: Apply small amount of CuraLaser Bio Stimulation Gel either on the therapeutic head or over the lower back.

Step 5: Press the switch to turn on the chosen therapeutic head. Hold CuraLaser as demonstrated.

Step 6: Place the therapeutic head in contact with the skin and slowly rotate the three sixty degree wheel to activate AGT Photonic Cold Laser and Nano Molecular Bio Stimulation.

Step 7: Increase the intensity of the Bio Stimulation till the patient feels needling or prickling sensation. Do not keep the intensity too low or too high.

Step 8: Start moving CuraLaser back and forth or in circular motion over the affected area of the injured part. You can alternate between large and small therapeutic head in the same treatment session if required.

Step 9: Keep adjusting the intensity of Bio Stimulation during the entire treatment session to ensure patient’s comfort.

Step 10: Continue the treatment for 10 to 15 minutes depending on the severity of the condition to get the best results.

Step 11:Turn off the device after completion of the treatment. Reduce the duration gradually in the follow up treatment sessions, as patient recovers.