An ultra-advanced FDA approved CuraLaser with patented Cellular Regeneration Technology (CRT) is a combination of two breakthrough modalities: AGT Photonic Cold Laser and Nano-Molecular BioStimulation. One of the truly unique characteristics of CuraLaser is that it has the ability to actually promote and enhance cellular healing, not just treat symptoms. The photons and electrons released by CuraLaser are absorbed by damaged tissues initiating a complex set of physiological interactions at the cellular level that reduces inflammation, relieves pain and accelerates tissue healing.

AGT Photonic cold Laser of CuraLaser is one of the most advanced therapeutic laser being used for the treatment of Pain disorders. When AGTP cold Laser is applied over the affected part photonic energy of the laser is absorbed by chromophores of the damaged tissues and this absorbed photons initiates a complex set of response at the cellular level. This results in up to 500% increase in ATP production. This increase in energy level enables damaged cells to metabolize at a higher rate and repair itself very fast resulting into normalization of cell function, healing and rapid pain relief.

“A Harvard study shows that cold lasers with intensities of < 5 mw are more effective than higher powered lasers. Anything above 5 mw may provide temporary relief by heating up the tissue; however the research shows that higher power lasers can inhibit the repair and healing process and decrease the production of ATP and protein synthesis in the cell.” Hence, CuraLaser with its cold laser technology is superior in providing pain relief.

It is a revolutionary low amperage bio-electrical current which passes through tissues, creating an imbalance in the number of protons on either side of the mitochondrial membrane. As the electrons move from the anode to the cathode, they cross the mitochondrial membrane and produce ATPs. It enhances ATP production by 500%, rate of protein synthesis by 70% and removal of waste products by 40%. Thus application of CuraLaser to an injured site augments the endogenous current flow, allowing cell in the traumatized area to regain their capacitance. Resistance is reduced, allowing bioelectricity to flow through and re-establishes homeostasis and healing. As a result, local physiological changes become evident, namely muscle relaxation, improved range of motion, and improved circulation.

“TENS which works on “pain-gate” theory, relieves pain symptoms temporarily by blocking pain signal to the brain, while CuraLaser which provides “Electrons” to the damaged cell, increase ATP production and fastens body’s natural healing process and treats not only symptoms but also the source of pain.’’ The current delivered by the CuraLaser runs on Nano-amperage whereas a TENS unit typically runs on a milli-ampere which is up to 1000 times stronger than the body’s electrical system. Anything above a micro-amperage intensity can also inhibit the repair and healing process and have a negative effect on cellular function“

CuraLaser is World’s First and Only Device with two therapeutic heads - Small Therapeutic Head to treat smaller body areas, and Large Therapeutic Head to treat bigger body areas. Small therapeutic Head treats smaller areas like wrist, ankle, knee etc. where as Large Therapeutic Head treats large areas like back, shoulder, calf etc.

Laser type - AGT Photonic Cold Laser, Laser Classification - Class 3R (IIIa), CW Output Power - <5mW, Wavelength - 670 nm, FWHM Beam Divergence - 32 Deg, Slope Efficiency - 0.5 mW/mA, Monitor Current - 0.1-0.5 mA

Biostimulation Type - Nano-Molecular Current, Waveform - HVLA Pulsed, Pulse width - 5-100 μsec, Frequency - 50 Hz, Pulse Period - 20-25 mS, Current Density - 0.25 mA/cm sq

CuraLaser can be a very useful treatment tool for physiotherapists, chiropractors, orthopedic doctors in managing various musculoskeletal conditions. Patients with chronic pain can also use Curlaser for pain relief.

CuraLaser is extremely compact, light weight and ideal for home visits by physiotherapists or for home use by patients. Its rechargeable battery, two treatment modalities and portable handheld design makes CuraLaser perfect for home usage.

With synergy of Two Breakthrough Modalities and Two Therapeutic Heads, CuraLaser is ideal to treat numerous complex musculoskeletal disorders and medical conditions, some of which are mentioned below. (The list is only indicative and does not cover all the conditions) Osteoarthritis and Rheumatoid arthritis Lower Spine Disorders and Sciatica Trapezitis, Cervical Spondylitis and Neck Pain Frozen Shoulder and Rotator cuff injury Post Surgical Pain (TKR/THR) and Post Traumatic Pain Sprains, strains, Soft Tissue Swelling or Bursitis Sports Injury and Ligament Injuries Planter Fasciitis, Ankle Pain and Foot Pain Golfer’s Elbow and Tennis Elbow TM Joint Pain and Carpel Tunnel Syndrome Fibromyalgia and Peripheral Neuropathy

Most patients start feeling better from the very first therapy session of CuraLaser. Pain and inflammation decreases after 3-5 sessions depending on the severity of the disease and patients feel pain free by 12-15 therapy sessions.

As per medical guidelines, CuraLaser should be used for 12-15 minutes during each therapy session. CuraLaser can be used twice a day depending on the severity of pain & swelling or as advised by the treating therapist or doctor. Treatment duration can be reduced to 8-10 minutes after 10 therapy sessions or once pain is almost relieved. Please check the user manual for more details about treatment protocols or call our customer care to talk with our medical experts.

Technologies used in CuraLaser are USFDA approved & are devoid of any kind of side effects. It can be used by any age group or with any other systemic disorders such as high blood pressure or diabetes. The only precaution required is in pregnant women & in patients with cardiac pace-maker.

Curalaser is approved and safe for use in patients with metal implants such as knee or hip replacement patients or with other metal implants.

CuraLaser has zero side effects even after using for years unlike pain medicines. This is very helpful in such chronic conditions as it saves patients from renal or hepatic toxicity of pain medications.

AGT Photonic Laser & Nano Molecular Bio-Stimulation modalities are the most advanced & effective technologies in the field of pain management and are approved worldwide by FDA or Medical bodies along with relevant clinical case studies. Clinical studies have shown that CuraLaser is 95% effective in reducing pain and inflammation in patients who received a full treatment regimen. Most subjects showed reduction in pain from the very first therapy session.

Yes. CuraLaser can be used on multiple body parts simultaneously.

Don’t aim CuraLaser directly in the eyes. However, there is no need to wear goggles. Always set biostimulation strength to “zero” level before starting the treatment & then gradually increase it as per protocol.

There are many devices available for pain treatment such as TENS, Diathermy or Infrared Waves. All these are age old technologies & they just produce temporary pain relief. CRT of CuraLaser is the most advanced therapy which acts at cellular level to promote cellular healing & treats the disease, not just symptoms.

CuraLaser Bio-Stimulation gel is developed with specific parameters to maximize the penetration of the Cold laser and improve the conductivity of the Bio-Stimulation in the body. So to get the best results with CuraLaser always use Advino Bio-Stimulation gel.

Charge for 8-10 hours or till the battery indicator shows the green light.

Yes.

Yes. If battery is fully discharged, it might take a few seconds for the battery indicator to blink.

It depends on multiple factors. Battery utilization varies with Bio-Stimulation strength, Skin conductivity of the patient, amount of inflammatory fluids in the affected part, therapy room temperature etc. So depending on these factors, the number of therapy sessions varies from 40-80 sessions per charge cycle.

There is a one year warranty on Curalaser which covers manufacturing defects & labour charges. Charger & Battery warranty is for 6 months only.

Please email us with the original purchase invoice & issues you are facing. Our technical expert will try to solve it over the phone. If it is not solvable then we will inform our local sales person to guide you with further process. If there is no sales person available in your country or city, you need to courier the device to the nearest service centre. We will reimburse the courier expenses if it is in warranty period.

Please send your query by email on info@curalaser.com or call us on +91 7046146146. Our customer care executive will connect you with our medical experts who will guide you for the best outcome.

Please send your query by email on support@curalaser.com or call us on +91 7046146146. Our customer care executive will connect you with our technical experts who will guide you for the best outcome.